All times are UTC + 10 hours [ DST ]




Post new topic Reply to topic  [ 26 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Rotor shaped wheels off a early U.S. rx-7
PostPosted: Wed Apr 09, 2008 7:43 am 
Offline
Boost Me Up
User avatar

Joined: Tue Mar 25, 2003 12:09 pm
Posts: 632
Location: Belgium, Europe
These wheels came on almost all S2 Rx-7's here.
I have heaps of them if anyone wants a set.
They tend to corrode badly so all of my wheels need restoration.
And shipping to Australia is $$$
I have shipped a few sets to the US and shipping was about US$200.
Australia is more...

_________________
Check out my pile of NOS and used old school parts: http://mazda.kicks-ass.org
Trader feedback: http://www.ausrotary.com/viewtopic.php?f=14&t=114560


Top
 Profile E-mail  
 
 Post subject: Re: Rotor shaped wheels off a early U.S. rx-7
PostPosted: Wed Apr 09, 2008 7:47 am 
Offline
Boost Me Up
User avatar

Joined: Tue Mar 25, 2003 12:09 pm
Posts: 632
Location: Belgium, Europe
The carburetor kit is known as the Rotary Engineering Twin Weber DCD36 setup.
Best carb setup for low down torque.
http://www.rx7club.com/showthread.php?t=465599

_________________
Check out my pile of NOS and used old school parts: http://mazda.kicks-ass.org
Trader feedback: http://www.ausrotary.com/viewtopic.php?f=14&t=114560


Top
 Profile E-mail  
 
 Post subject: Re: Rotor shaped wheels off a early U.S. rx-7
PostPosted: Wed Apr 09, 2008 7:52 am 
Offline
Boost Me Up
User avatar

Joined: Tue Mar 25, 2003 12:09 pm
Posts: 632
Location: Belgium, Europe
The 1984-1985 US 12A also had this H-type housings in the 4 port engines.
Basically the stronger 12aT housings in N/A form.

_________________
Check out my pile of NOS and used old school parts: http://mazda.kicks-ass.org
Trader feedback: http://www.ausrotary.com/viewtopic.php?f=14&t=114560


Top
 Profile E-mail  
 
 Post subject: Re: Rotor shaped wheels off a early U.S. rx-7
PostPosted: Wed Apr 09, 2008 5:39 pm 
Offline
Spitting Seals

Joined: Fri Oct 14, 2005 10:07 pm
Posts: 942
Location: GREECE
multirotor wrote:
These wheels came on almost all S2 Rx-7's here.
They tend to corrode badly so all of my wheels need restoration.

Exactly.
Never s1 (so never SP), only s2, hard to find a pair not corroded.

_________________
1967 T600, 1967 1000 sedan, 1968 1500, 1971 RX-2 coupe, 1973 RX-3 sedan (10A, under restoration), 1973 RX-4 hardtop RHD, 1979 RX-9, 1981 RX-9, 1983 RX-7


Top
 Profile  
 
 Post subject: Re: Rotor shaped wheels off a early U.S. rx-7
PostPosted: Thu Apr 10, 2008 11:32 pm 
Offline
Spitting Seals

Joined: Fri Oct 14, 2005 10:07 pm
Posts: 942
Location: GREECE
An immaculate example

Image


and the usual picture

Image

_________________
1967 T600, 1967 1000 sedan, 1968 1500, 1971 RX-2 coupe, 1973 RX-3 sedan (10A, under restoration), 1973 RX-4 hardtop RHD, 1979 RX-9, 1981 RX-9, 1983 RX-7


Top
 Profile  
 
 Post subject: Re: Rotor shaped wheels off a early U.S. rx-7
PostPosted: Fri Apr 11, 2008 6:23 pm 
Offline
The Bug Has Bitten

Joined: Sun Mar 23, 2008 9:42 am
Posts: 290
Which model did these wheels come off :-k .


Top
 Profile  
 
 Post subject: Re: Rotor shaped wheels off a early U.S. rx-7
PostPosted: Fri Apr 11, 2008 6:32 pm 
Offline
Epitrochoid Shaped Head
User avatar

Joined: Fri Jul 08, 2005 5:13 pm
Posts: 1507
Location: Under a car, NSW
RX300 wrote:
Which model did these wheels come off :-k .

Mate, why do you suddenly feel the need to add a worthless post to the end of every topic in the forum?!? If you'd actually read the thread you would have seen it said that they came out on series 2 rx7s in America and some parts of Europe.


Top
 Profile  
 
 Post subject: Re: Rotor shaped wheels off a early U.S. rx-7
PostPosted: Fri Apr 11, 2008 6:43 pm 
Offline
The Bug Has Bitten

Joined: Sun Mar 23, 2008 9:42 am
Posts: 290
metalhead wrote:
RX300 wrote:
Which model did these wheels come off :-k .

Mate, why do you suddenly feel the need to add a worthless post to the end of every topic in the forum?!? If you'd actually read the thread you would have seen it said that they came out on series 2 rx7s in America and some parts of Europe.


I did not know :oops: , Because I have seen them on an RX3, and I have not been on the computer in a long time.


Top
 Profile  
 
 Post subject: Re: Rotor shaped wheels off a early U.S. rx-7
PostPosted: Fri Apr 11, 2008 6:56 pm 
Offline
The Bug Has Bitten

Joined: Sun Mar 23, 2008 9:42 am
Posts: 290
Here is proof :evil: .


Attachments:
64899696_full.jpg
64899696_full.jpg [ 59.31 KiB | Viewed 481 times ]
64898395_full.jpg
64898395_full.jpg [ 69.28 KiB | Viewed 480 times ]
Top
 Profile  
 
 Post subject: Re: Rotor shaped wheels off a early U.S. rx-7
PostPosted: Fri Apr 11, 2008 7:25 pm 
Offline
Epitrochoid Shaped Head
User avatar

Joined: Fri Jul 08, 2005 5:13 pm
Posts: 1507
Location: Under a car, NSW
Not sure what you felt the need to send me pm me about and put up an angry face and picture for? Let me remind you of the posts already in this thread:
baltsiotis wrote:
multirotor wrote:
These wheels came on almost all S2 Rx-7's here.
They tend to corrode badly so all of my wheels need restoration.

Exactly.
Never s1 (so never SP), only s2, hard to find a pair not corroded.

multirotor wrote:
These wheels came on almost all S2 Rx-7's here.
I have heaps of them if anyone wants a set.
They tend to corrode badly so all of my wheels need restoration.
And shipping to Australia is $$$
I have shipped a few sets to the US and shipping was about US$200.
Australia is more...

PROJECT-X605 wrote:
baltosis was saying in another thread that series 2's in greece came with the rotor wheels

Rota_Motor wrote:
those wheels are found on US and euri spec S1 or S2 RX-7s, not worth alot where they come cfrom apparently, but maybe worth a couple hundred in australia if you can find someone that wants them.

and I think bumpstart is on the money, webers, maybe IDF but they seem to use them on VW's a fair bit.

spants wrote:
i have a photo of my brother in Vienna in 1988
with a very clean (only a few years old obviously) first gen with those wheels

Now I'm not looking for a fight or anything, but I must admit that going through 20+ topics with 'new posts' that were a sentence from yourself that added nothing to the topic was pretty annoying. In this topic, you posted:
RX300 wrote:
Which model did these wheels come off :-k .

And I pointed out that the answer to your question was already in the thread and asked why you felt the need to add a post on everything. Nothing to get upset about. Never mind, hope that clears things up for you. Have a nice night...


Top
 Profile  
 
 Post subject: Re: Rotor shaped wheels off a early U.S. rx-7
PostPosted: Fri Apr 11, 2008 8:25 pm 
Offline
Get a Girlfriend
User avatar

Joined: Sat Feb 05, 2005 12:55 pm
Posts: 2838
Location: Bankstown, NSW
yeah mate i dont want to pick on you, but do a search before you start a thread and actually read what is written because alot of what you ask has been answered before

_________________
Image

MASSIVE PARTS SALE!!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 26 posts ]  Go to page Previous  1, 2

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group