NSW: Rx7 Series 1/2/3 parts (Big lot) ...**Feb 18' updated

Moderator: rotaryrx7white

Post Reply
Message
Author
Dr Chubb
Boost Me Up
Posts: 654
Joined: Wed Apr 02, 2003 12:22 pm
Location: Sydney
Has liked: 0
Been liked: 1 time

NSW: Rx7 Series 1/2/3 parts (Big lot) ...**Feb 18' updated

#1 Post by Dr Chubb » Thu Apr 16, 2015 10:15 am

[/b]
For sale: RX7 series 1/2/3 parts
Item Condition: All parts used good condition
Price and price conditions: As per list
Extra Info:
Pictures: Below & on request
Contact Details: PM / Post
Location: Sydney, Seven Hills ( 10mins NW from Parramatta)
Delivery & Conditions of Delivery: Pickup or freight via Toll/Auspost available via EFT

Engine parts 12A
-12A timing cover $70 Sold
-12A rx7 engine crossmember $20
-12A air pump $20
-12A Stationary gears set $50
-12A Rx7 Nikki Carby - $100
-12A Water pump and housing $sold
-12A oil pump $40
-12A assorted hoses $ enquire
-12A coils used $40pr
-12A engine through bolts $35
-13B turbo manifold with s4/5 turbo flange to suit rx7 Series 1-3 $120

Mechanical
-12A s2 manual gearbox, good condition, shifts great & no noises w/ tail sft+cross member+shifter+4 puk clutch/pressure plate $400 Sold
-S2 Front struts with no brakes,discs,brake lines (4x110) suitable for weld on coil over upgrade $150
-S2 Diff shell $150
-S2 axils $150
-s2 diff centre $200
-S2 Diff welded centre without brakes $ Sold
-Diff trailing arms x4 $40
-12A extractors 2.5" dual primaries to into a collector $sold
-12A standard Exhaust complete with thermal reactor $400
-s1/2 radiator auto $50
-12A S1,2,3 Clutch fan $40
-Brake Master cylinder $30
-Brake booster $40
-S2 steering column with steering box $150 / s3 $200
-Headlights globes $20ea
-Headlight motors w/arms pr $70
-Fuel pump $40
-fuel pump trays $20
-s1/2 Fuel tank complete $100
-Fuel tank shroud x3 pieces $20
-Fuel tank sensor $30
-Bonnet handle, cable, latch $20
-Air Con rubber hoses $40
-Air Con condensor $40
-Air con complete setup $200
-Aircon lines Hard x1/soft x1 $50
-s2 Engine fan shroud $50
-Std sway bars Front $20
-Std rear springs $20
-Hand brake assy with cables $40
-Speedo cable $25
-s2 & s3 12A manual & auto tail shaft $sold
-s2 full body harness $150 / lite damage or cut plug or two+ $70
-S3 full body harness $150 / lite damage or cut plug or two+ $70
-Most electrical components throughout the car are available
-s2 12a Rx7 electronic dizzy $150 (1 left) color=#FF0000]Sold[/color]
-s1/2/3 charcoal canister (engine bay) $20
-S1/2/3 Radiator overflow bottle $20
-S1/2/3 Wiper bottle $20
-Gear stick transmission tunnel rubber boot cover w/ steel surround bracket $20
-s1/2/3 external fuel lid cover $20-30 (with & without lock style available)
-S1/2/3 gearbox cross members $20
-s1/2/3 front castor rods and good aftermarket bushes $40pr
-s2/3 hand brake cables $45
-s1/2/3 12A starter motor $Sold

Exterior
- s1/2/3 Doors, straight & rust free $150 1x passenger / Doors with either lite rust and straight or rust free doors with dents $70
-s2/3 Front bar with brackets $Sold
-s2/3 front bar brackets pair $sold
-s2/3 Front lower air dam apron $sold
-s1/2/3 wiper panel $40ea (3 to choose from)
-s1/2/3 fuel lids with/without lock also solenoid if required
-Front duct air dam scoop in the mouth duct for Radiator core $40
-Radiator box shroud set x3 pieces $40
-Radiator box upper piece $25
-s3 sun roof Complete with interior and all clips/hinges/screw jack/etc $sold
-Rear Bar with red $sold
-s2/3 Drivers side tail light $70 -120 ( 3 available)
S2/3 passenger tail light $100 ( slight clips..6/10 condition)
-Lower rear quarter L & R cut out $rust free Sold
-Front guards - Both passenger and drivers sides...$40-70ea ( Some have a dent-few and others have rust)
-Bonnet $sold
-s2 Rx7 standard wheels 13" wheels x4 $100 set w/185 tyres 80% tread and $150 for 205 width tyres per set
-S2/3 rear hatch glass with wiper motor $40ea
-Gutter external windscreen trims $ enquire with which ones you need / $100 full set
-Windscreen motor with mechanical arms $40
-Wiper arms $30 pair
-s2/3 door window glass $30ea
-s2/3 door motor mechanical arm setup $35ea
-s2/3 window door motors $35a
-Exterior rubber trims, let me know which ones you need
-Rear hatch glass hinges $20pr
-Front headlight in between apron $70
-Headlight panel covers $20pr
-S2/3 front blinker with lens $sold
-s1/2/3 door handle drivers or passenger side $25ea
-Door mirrors complete $120pr
-Quarter glass $20ea Sold
-s1/2/3 front guard inners $35ea ( some great fully intact and other the front horizontal leading panel prior to the arch for wheel is damaged/missing $20ea
-s1/2/3 steering rack and front suspension arms $enquire
-S1/2/3 rear factory height springs $20
-s1/2/3 rear factory sway bar complete setup $35
-s2/3 bumper bar guides/clips that mount on front guards $40pr or rear quarters $30pr
-s/1/2/3 Aircon hoses $50pr Hard and soft lines

Interior
-S1/2/3 cracked dash $sold
-s1/2/3 Seat rails assorted...drivers S1 set at the moment $50 ( will still fit s2/3)
-s2/3 Centre radio garnish $50 Sold[/colour
-Assorted interior switches throughout the interior $enquire
-s2/3 window power switches $25ea
-S2 rx7 cassette player $sold
-s2 Clock $sold
-s1/2/3 various rubber seals $pm All available
-Gear boot $15 a little worn though a good gap filler while you look for a good/new one
-Assorted knobs on centre garnish $Enquire $10ea
-Centre glovebox black/brown/red $40
-Centre window switch panel $35
-Ignition Barrel $40 w/key / $70 with switching unit on the back
-Seat belts $50 set of four plus assorted individual belts available $enquire
-Review roof mounter mirror $35
-Handbrake handles with plastic trims & chrome ring $20
-Blinker/wiper stork $45
-A Pilla trims Black $sold
-A Pilla S2 trims Brown $50
_A pilla trims Maroon S3 $70 set
-s2 brown assorted brown trim$ equine
-Rear seat latch & mounting brackets $20 set
-Assorted Black interior pieces...PM with what your after

Electrical
-s2 and s3 complete wiring loom, NOT fu*ked with like alot of them! $150
-s3 wiring loom, 90% good, 1-2hrs of tidy up work require or good plug spares $70 Sold

Glass
-Drivers door glass x1 $20ea
-Passenger door glass x3 $20ea One left
-Rear hatch glass s2/3 with wiper unit $40

Series 3 parts I have as follows:
Series 3 axils $sold
Series 3 diff centre (not lsd) $200
Series 3 wheels factory with tyres $200
Radiator shroud set $45
Assorted external windscreen trims $PM $20ea / $100 set
Hand Brake cables complete set $45
Ignition barrel and matching lock set $70
Throttle Cable $20
Bonnet cable $20
Speedo cable $30
Head light motors with good arms $70
Front side bumper guides $35
Rear side bumper guides $20
Fuel lid and solenoid $30 (no lock and w/lock available)
Side front guard blinkers $25pr
Drivers seat rails $sold I have a s1 drivers et atm that will work as well $50
Passenger seat rails $sold
Rear springs standard $25
External assorted rubber feature trims $PM
Tail Shaft $sold
Castor Rods and bushes $40pr
Window motors $35ea
Factory sunroof $sold
3" turbo exhaust with two mufflers and hotdog..bolt up & requires dump pipe to complete $sold
Series 3 fuel pump in factory tray $50
Boot blind w/mount brackets, has had something hot burn the RX7 decal print on the blind other functions fine $sold

Panels:
Rear wing, similar to IPRA (shallow depth) with mounting rods $sold
Group C wing new $200
Guards both L&R s3 though can be used as s2 with trim covering blinker hole $50-150ea
Bonnet $sold
Doors $70-150ea the cheaper doors have a little rust with little/no dents and others have no rust and a few dents..$50-70/ Good doors rust/mosty or are rust free $150
Front guards $40-100
Head Light covers $20pr

****Anything else I haven't listed your chasing just PM me as I may just have it!****[/b]

Cheers,
Nathan
Last edited by Dr Chubb on Wed Feb 14, 2018 12:17 am, edited 16 times in total.


S6 Rx7 Aus Spec
S2 Rx7

chiron
Registered Rotor User
Posts: 7
Joined: Mon May 07, 2012 6:40 am
Has liked: 0
Been liked: 0

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#2 Post by chiron » Fri Apr 17, 2015 12:10 pm

pm sent!



MOB13B
Mazda Approved Mechanic
Posts: 217
Joined: Tue Nov 20, 2007 10:20 am
Has liked: 0
Been liked: 0

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#3 Post by MOB13B » Sun Apr 19, 2015 6:19 am

Pm'd


MOB13B PB 11.2@124mph full street trim (old setup)
http://ausrotary.com/viewtopic.php?f=21 ... 93&start=0" onclick="window.open(this.href);return false;
http://www.visrotary.com/" onclick="window.open(this.href);return false;

rxw06
Registered Rotor User
Posts: 2
Joined: Mon Dec 12, 2011 1:27 pm
Has liked: 0
Been liked: 0

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#4 Post by rxw06 » Sat Apr 25, 2015 3:22 pm

hey mate just chasing a s1 clutch throwout bearing my kit came with a new bearing but I need the outer case so my fork will slide on



Dr Chubb
Boost Me Up
Posts: 654
Joined: Wed Apr 02, 2003 12:22 pm
Location: Sydney
Has liked: 0
Been liked: 1 time

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#5 Post by Dr Chubb » Sun Apr 26, 2015 9:16 am

rxw06 wrote:hey mate just chasing a s1 clutch throwout bearing my kit came with a new bearing but I need the outer case so my fork will slide on
If your just after a clutch fork bearing and your in Sydney ring Western Clutch Services in St Marys 9623 1233
If your after a clutch fork for a S1 rx7 box I don't have one atm, try Alex Red Line Rotary in Auburn 9648 1637

Cheers,


S6 Rx7 Aus Spec
S2 Rx7

Dr Chubb
Boost Me Up
Posts: 654
Joined: Wed Apr 02, 2003 12:22 pm
Location: Sydney
Has liked: 0
Been liked: 1 time

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#6 Post by Dr Chubb » Wed May 20, 2015 1:28 am

Up you go... :D
These users liked Dr Chubb's post:
xhristofer (Mon Apr 02, 2018 12:32 pm)


S6 Rx7 Aus Spec
S2 Rx7

chiron
Registered Rotor User
Posts: 7
Joined: Mon May 07, 2012 6:40 am
Has liked: 0
Been liked: 0

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#7 Post by chiron » Thu May 21, 2015 1:40 am

Just for note....I bought some stuff from here and it was delivered on time as promised. The items where as described so many thanks!!!! =D> =D>



AlWanga
Weekend Cruiser
Posts: 77
Joined: Mon Mar 22, 2010 10:07 pm
Has liked: 5 times
Been liked: 3 times

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#8 Post by AlWanga » Thu May 21, 2015 5:12 pm

I bought some parts from Nathan and they arrived exactly as described and packaged extremely well. Thanks very much Nathan. A+ parts and delivery!


Wanted Re-graphed dizzy (not locked) for 12A Bridgeport or someone who can modify mine

hardkandy
Registered Rotor User
Posts: 5
Joined: Tue Mar 17, 2015 11:05 pm
Has liked: 0
Been liked: 0

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#9 Post by hardkandy » Fri May 22, 2015 8:42 pm

PM sent mate



User avatar
-RX-7-
The Bug Has Bitten
Posts: 419
Joined: Sun Feb 13, 2005 10:00 pm
Location: sydney
Has liked: 0
Been liked: 0

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#10 Post by -RX-7- » Fri Jun 26, 2015 11:15 pm

Pm sent


RX-7 S2 13BT ***300HP@14PSI*** - long gone

Dr Chubb
Boost Me Up
Posts: 654
Joined: Wed Apr 02, 2003 12:22 pm
Location: Sydney
Has liked: 0
Been liked: 1 time

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#11 Post by Dr Chubb » Fri Jul 24, 2015 11:43 am

All 38 PMS replied to :lol:
I've been o/s for 8wks though back now..


S6 Rx7 Aus Spec
S2 Rx7

Bear1
Registered Rotor User
Posts: 24
Joined: Thu Oct 30, 2014 1:20 pm
Has liked: 0
Been liked: 0

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#12 Post by Bear1 » Tue Jul 28, 2015 1:43 pm

Hi Nathan,

just wandering when i can pick up the parts?



slaya
Mazda Approved Mechanic
Posts: 185
Joined: Wed Dec 29, 2004 2:46 pm
Location: Penrith, NSW
Has liked: 0
Been liked: 0

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#13 Post by slaya » Sun Aug 02, 2015 8:28 am

Hi

PM sent

Thanks
Matt



Bear1
Registered Rotor User
Posts: 24
Joined: Thu Oct 30, 2014 1:20 pm
Has liked: 0
Been liked: 0

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#14 Post by Bear1 » Wed Aug 05, 2015 8:24 am

hi ,
i am assumming you do not want to sell the parts?
i haven't heard from you since last time you oxt me.



Dr Chubb
Boost Me Up
Posts: 654
Joined: Wed Apr 02, 2003 12:22 pm
Location: Sydney
Has liked: 0
Been liked: 1 time

Re: NSW: Mazda Rx7 Series 1/2/3 parts (Big lot)

#15 Post by Dr Chubb » Wed Aug 05, 2015 4:34 pm

Bear1 wrote:hi ,
i am assumming you do not want to sell the parts?
i haven't heard from you since last time you oxt me.
Remind me of what you were after?


S6 Rx7 Aus Spec
S2 Rx7

Post Reply