Are you being blocked from seeing Photobucket images in AusRotary posts?

Well, there is a temporary fix available in the form of a browser extension/plugin.

You can find them here:



We are working on a permanent solution that will mean all externally hosted images that are still online are hosted by us. In the meantime, try these to get the page working properly.

This announcement can be dismissed by clicking on the 'X' in the top right hand corner.

[NSW] 4x110 wheels, 323 parts, piston engines

Moderators: rotaryrx7white, -==L=a=N=c=E==-

Message
Author
User avatar
timmy201
The Bug Has Bitten
Posts: 356
Joined: Mon Jun 16, 2008 11:20 pm
Location: Wollongong

[NSW] 4x110 wheels, 323 parts, piston engines

#1 Post by timmy201 » Tue Oct 23, 2012 5:53 pm

For sale:
1) 15x6 +12 Rial Mesh wheels SOLD!
2) Set of 4 14x6 +20 Momo wheels
3) Set of 6 RX7 series 2 wheels
4) 1.5L D5 engine - complete including electronic dissy 
5) 1.4L UC engine - rebuildable/parts
6) 1.3L TC engine
7) 3 speed auto trans - rebuilt SOLD!
8) Original air con system - disconnected and removed from the car - "Sandon Rotary" brand. SOLD!
9) Assorted gaskets
10) Engine parts - many to suit piston engines
12) Front passenger door to suit 323 4 door (Hatch or Wagon) SOLD!
13) "Jetbag" roof racks to suit gutter rails SOLD!
Item Condition:
1) 4x110, From 1982 so should be historic rego suitable. All professionally straightened ($450) and have new tyres ($450)- 195/50R15. Comes with a set of 20 longer chromed wheel boltsSOLD!
2) 4x110, Repainted and a pair of 95% tread tyres (175/65R14), pair with toe wear - from 1982 so should be historic rego suitable. I also have a pair of 205/60R14 tyres with decent tread I can through in
3) 4 without tyres painted black, 2 gutter rashed ones with bald tyres.
4) I bought this as a backup for my wagon, told it was running well. Has the electronic dizzy. Not looking to separate at the moment
5) I was planning on rebuilding this one. It's in pieces, I can assemble loosely if needed
6) Comes with one manifold, one head, one carby etc
7) I bought this with my first engine. It shifts really well, new gasket goo around all the seals and was told was rebuilt, includes torque converter, flywheel etc
8) It had no gas in it after sitting for 10 years. Fitted in 1979. Comes with compressor, condenser, bracket to suit TC/UC/D5 engine, tensioner. Fins all look good and the loom is there too SOLD!
9) I'll have to check what I've got left
10) Lot of parts - alternators, starter motors, dizzys, etc
12) NO RUST! Was brown, now bright yellow SOLD!
13) Used only a few times. They are made in Sweden, and look identical to Thule brand
Price and price conditions: All prices are of course negotiable
1) $900SOLD!
2) $600 delivered to your nearest e-go depot, $500 pick up
3) $Free
4) $200
5) $Free - pickup only as a complete unit
6) $Free - pickup only as a complete unit
7) SOLD!
8)
9)
10)
12) $75 SOLD!
13) $75 SOLD!
Extra Info: Sold my car and don't need the spares! I can bundle parts together too..
Pictures:
2)
Image
Tread on the good pair
Image
Tread on bad pair
Image
3)
Image
4)
Image
8) SOLD!
Image
Image
10)
Box 1. Starter motors, engine looms, alternators, brake fluid tank, granny rubber anti static thing, water pump
Image
Box 2. Intake manifold x3, chrome bumper end cap, fan and pulley, exhaust manifold
Image
Box 3. Carby x2, alternator x3, 4 speed crossmember, brand new rubber gearbox mount
Image
Extras. Front blinker lenses for 323, cloudy but not broken. Auto shifter, Stanley headlights x4 and two with retaining clips, lefthand wagon taillight which has broken lense
Image
Bugeye headlight surround. Been a bit bent but not beyond repair
Image
RX4? front struts with hectic choppies. I also have full length springs
Image
The timmy201 custom lip spoiler. Bolts onto the tow loops
Image
Image
13" chrome wheel trims
Image
Others on request
Contact Details: PM
Location: Wollongong / Kiama
Delivery & Conditions of Delivery: Pickup or Can deliver most parts Kiama - Helensburgh for free
Last edited by timmy201 on Wed Feb 19, 2014 5:49 pm, edited 14 times in total.


Image

Derelikt
Registered Rotor User
Posts: 4
Joined: Mon Feb 20, 2012 10:49 pm

Re: [NSW] 323 parts, wheels, piston engines

#2 Post by Derelikt » Wed Oct 24, 2012 1:57 pm

Are you wiling to post the aircon state
?



User avatar
timmy201
The Bug Has Bitten
Posts: 356
Joined: Mon Jun 16, 2008 11:20 pm
Location: Wollongong

Re: [NSW] 323 parts, wheels, piston engines

#3 Post by timmy201 » Fri Oct 26, 2012 5:03 pm

Derelikt wrote:Are you wiling to post the aircon state
?
It's pretty heavy, especially the compressor, and you'd have to make your own pipes, as I can't package them up... I have a guy interested already, I can let you know if it falls through.


Image

User avatar
timmy201
The Bug Has Bitten
Posts: 356
Joined: Mon Jun 16, 2008 11:20 pm
Location: Wollongong

Re: [NSW] 323 parts, wheels, piston engines

#4 Post by timmy201 » Sun Oct 28, 2012 11:37 am

Door sold


Image

User avatar
timmy201
The Bug Has Bitten
Posts: 356
Joined: Mon Jun 16, 2008 11:20 pm
Location: Wollongong

Re: [NSW] 323 parts, wheels, piston engines

#5 Post by timmy201 » Sun Nov 11, 2012 4:57 pm

First post updated with new pictures and items


Image

User avatar
timmy201
The Bug Has Bitten
Posts: 356
Joined: Mon Jun 16, 2008 11:20 pm
Location: Wollongong

Re: [NSW] 4x110 wheels, 323 parts, piston engines

#6 Post by timmy201 » Tue Nov 27, 2012 7:51 am

One carby sold


Image

User avatar
timmy201
The Bug Has Bitten
Posts: 356
Joined: Mon Jun 16, 2008 11:20 pm
Location: Wollongong

Re: [NSW] 4x110 wheels, 323 parts, piston engines

#7 Post by timmy201 » Thu Dec 13, 2012 10:59 am

I've also got the double row crank pulley to suit the aircon unit


Image

Derelikt
Registered Rotor User
Posts: 4
Joined: Mon Feb 20, 2012 10:49 pm

Re: [NSW] 4x110 wheels, 323 parts, piston engines

#8 Post by Derelikt » Thu Dec 13, 2012 1:24 pm

How did you go with the aircon?



20B-RX3
Mazda Approved Mechanic
Posts: 128
Joined: Thu Feb 17, 2011 8:49 pm

Re: [NSW] 4x110 wheels, 323 parts, piston engines

#9 Post by 20B-RX3 » Thu Dec 13, 2012 4:58 pm

will take the aircon on weekend if you still got it pm your numbr to me please



User avatar
timmy201
The Bug Has Bitten
Posts: 356
Joined: Mon Jun 16, 2008 11:20 pm
Location: Wollongong

Re: [NSW] 4x110 wheels, 323 parts, piston engines

#10 Post by timmy201 » Thu Dec 13, 2012 5:03 pm

Derelikt wrote:How did you go with the aircon?
Sorry, I'd really prefer not to post this. It's the combination of heavy and fragile that I'd rather not risk damaging in transit
20B-RX3 wrote:will take the aircon on weekend if you still got it pm your numbr to me please
Sent you a PM


Image

User avatar
timmy201
The Bug Has Bitten
Posts: 356
Joined: Mon Jun 16, 2008 11:20 pm
Location: Wollongong

Re: [NSW] 4x110 wheels, 323 parts, piston engines

#11 Post by timmy201 » Tue Jan 01, 2013 1:27 pm

Some parts sold, some still available.

Prices all negotiable.


Image

User avatar
timmy201
The Bug Has Bitten
Posts: 356
Joined: Mon Jun 16, 2008 11:20 pm
Location: Wollongong

Re: [NSW] 4x110 wheels, 323 parts, piston engines

#12 Post by timmy201 » Wed Jan 16, 2013 4:09 pm

Bump


Image

myold323
Mazda Approved Mechanic
Posts: 205
Joined: Wed Mar 11, 2009 3:46 pm

Re: [NSW] 4x110 wheels, 323 parts, piston engines

#13 Post by myold323 » Thu Jan 31, 2013 4:59 pm

Hi Tim,
Do you have an electronic dizzy if so how much 8)
Cheers Greg.



User avatar
timmy201
The Bug Has Bitten
Posts: 356
Joined: Mon Jun 16, 2008 11:20 pm
Location: Wollongong

Re: [NSW] 4x110 wheels, 323 parts, piston engines

#14 Post by timmy201 » Thu Jan 31, 2013 9:58 pm

myold323 wrote:Hi Tim,
Do you have an electronic dizzy if so how much 8)
Cheers Greg.
Yours for $200 with a free D5 :D


Image

User avatar
timmy201
The Bug Has Bitten
Posts: 356
Joined: Mon Jun 16, 2008 11:20 pm
Location: Wollongong

Re: [NSW] 4x110 wheels, 323 parts, piston engines

#15 Post by timmy201 » Sat Feb 16, 2013 6:35 am

I've sold the Rial wheels (the gold ones)

I can deliver the Momo wheels (black) to your nearest e-go.com.au depot for $600-650 depending on the state


Image

Post Reply