Ignition barrel - what's normal operation ?

Any type of technical questions or info

Moderators: KillerRx4, orx626

Message
Author
twindizzy
Mazda Approved Mechanic
Posts: 248
Joined: Wed Apr 28, 2004 11:51 pm
Location: 80s
Has liked: 0
Been liked: 0

Re: Ignition barrel - what's normal operation ?

#16 Post by twindizzy » Tue Aug 26, 2008 6:19 pm

R100ute wrote:wat do the other 3 pins on the relay go too?
The relay for the coils:

85- The ignition ON wire (must have power when the car is cranking also).

86- Ground.

30- Constant power ( must be fused 15A).

87- Goes to the coils (+)

Note: I also fuse the ignition wire with a 10A fuse as close as possible to the ignition source.



User avatar
R100ute
Get a Girlfriend
Posts: 2042
Joined: Tue Jul 13, 2004 8:22 pm
Has liked: 0
Been liked: 0

Re: Ignition barrel - what's normal operation ?

#17 Post by R100ute » Thu Aug 28, 2008 9:15 pm

thanx :P



tipsy
Weekend Cruiser
Posts: 84
Joined: Wed Nov 29, 2006 7:54 pm
Location: Adelaide
Has liked: 0
Been liked: 0

Re: Ignition barrel - what's normal operation ?

#18 Post by tipsy » Tue Jun 08, 2010 10:40 pm

I found it,

this is great just what I was searching for


I gotta stop talkin about the Gdam car and just finish building it

rotary lover
Get a Life
Posts: 3984
Joined: Thu Apr 10, 2003 8:51 am
Has liked: 0
Been liked: 0

Re: Ignition barrel - what's normal operation ?

#19 Post by rotary lover » Wed Jun 09, 2010 6:40 pm

The ignition barrel with extra wire came on the last of 323 wagons.They look very similar to RX3/808



Fisco
Rotary?... What The?
Posts: 33
Joined: Tue Apr 12, 2011 7:29 am
Has liked: 0
Been liked: 0

Re: Ignition barrel - what's normal operation ?

#20 Post by Fisco » Thu Oct 19, 2017 8:42 pm

This post has been proper useful as have done the same mod as multirotor, installing an Rx7 electronic dizzy to what was originally a twin dizzy 10A.
The main difference from sim_rx3's post is that on UK models, the black/white wire (IGN 1) is just black, and there is a 6th wire as multirotor identified. This additional wire (black and white) only has power when the key is out or at the lock position. Looking at the wiring diagram I have, it seems this is a feed for for the clock, interior light, and cigarette lighter so they also work when the car is off or key is out. They must take power from a different route when the ignition is at ACC or ON. Clearly there are other ways to wire this up such that these accessories have power at all ignition switch positions, hence not all models having this wire. Anyway, that's my meagre contribution.



Post Reply
  • Similar Topics
    Replies
    Views
    Last post